#MINICOM 2.2 INSTALL#
#MINICOM 2.2 SERIAL#
#MINICOM 2.2 DRIVER#
#MINICOM 2.2 PROFESSIONAL#

Please follow this guide to get this fixed: Using USB devices with GNU/Linux - Knowledge Base - Zubax Knowledge Base This is because udev is not properly configured. Oddly enough, once I fixed that, I keep getting: flash_via_serial_bootloader.sh -2.2-4.1. /dev/ttyACM0 Configure your VM to automatically attach the device to the VM for extra convenience.Įxample: $ chmod +x flash_via_serial_bootloader.sh Please try using the following script on Linux (e.g.

#MINICOM 2.2 PROFESSIONAL#

Networking, Security and Virtualization Environment in which one I have already gained a professional experience.I couldn’t reproduce your problems locally. (where I'm responsible for implementing, maintaining, supporting of network devices, and in some casesĭesigning communication networks like LANs, WANs, SAN and VoIP for our customers. At moment, I live and work in Pescara (Italy) as Network Engineer for HiTrust company I am interested in new experiences that allow me to get a good knowledge in the field, improving My goal is to become an expert of Project Data Center VirtualizationĪnd Data Center Network and get a remarkable position in the Networking industry with the possibility of getting aĬareer advancement. Currently, I’m preparing the CCNAĭata Center (640-911 DCICN 'n 640-916 DCICT). I’ve also obtained the CCNP certification (Cisco Certified Network Professional Routing & Switching) passedĪll the exams, CCNP 642-902 ROUTE, 642-813 SWITCH and 642-832 TSHOOT. Networking Academy Program) I got the CCNA 640-802 Certification (Cisco Certified Network Associate Routing & Switch, with implementation of VoIP (Voice Over IP) used Wildix infrastructure. Experienced inĬonfiguring of Cisco Router ISR (RVxx, 8xx/18xx series), Cisco Switch Catalyst (200/300/29xx/35xx series), and ZyXEL MaaS and Juju Service, and an elementary knowledge of Openstack (IaaS Cloud computing). Moreover, I have base knowledge on VMware Datacenter & Cloud Infrastructure (VMware vCloud Suite), KVM Hypervisor, I have a good knowledge withing the Network and Security Business Unit (BU), withĮxperience with Cisco Switch/Router device, Wildix PBX, Palo Alto and FortiGate Next-Generation Firewall devices. Network Engineer with over 5+ years experience in Information Technology environment, focusing my experiences on

#MINICOM 2.2 SERIAL#

pl2303: Prolific PL2303 USB to serial adaptor driverĭepends how we saved the profile previously, now we should be able to access to the CLI.

#MINICOM 2.2 DRIVER#

usbcore: registered new interface driver pl2303 usb 2-2.2: pl2303 converter now attached to ttyUSB0 USB Serial support registered for pl2303 Now we can check if the operation was successful: $: dmesg Please note that those codes related to vendor and product are taken from the previous output.

We now need to add to configure this device with the command modprobe, (see the last line) $: sudo modprobe usbserial vendor=0x067b product=0x2303 Virtual Mouseīus 002 Device 003: ID 0e0f:0002 VMware, Inc. We should see an output like this: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubīus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubīus 002 Device 002: ID 0e0f:0003 VMware, Inc. Just remember to save the configuration with the option “Cisco” or “Save setup as dfl”. As a second step we can connect our USB adapter, and run the following command: $: lsusb With the “-s” option we can modify some settings. Make sure the configuration look like this.

#MINICOM 2.2 INSTALL#

Here some steps necessary to correctly configure Minicom in order to connect a Console port on Cisco Devices, if we have a USB console cable adapter.įirst of all we need to install and open from gnome-terminal Minicom : $: sudo apt-get install minicom $: sudo minicom -s

Minicom 2.2